(navigation image)
Home American Libraries | Canadian Libraries | Universal Library | Community Texts | Project Gutenberg | Biodiversity Heritage Library | Children's Library | Additional Collections
Search: Advanced Search
Anonymous User (login or join us)
Upload
See other formats

Full text of "MacBook Pro 15" Retina Display Mid 2012 Repair Manual"

Installing MacBook Pro 15" Retina Display Mid 2012 I/O Board Cable 



/fixit 



Installing MacBook Pro 15" 
Retina Display Mid 2012 I/O 

Board Cable 

Written By: Brett Hartt 



S TOOLS: © PARTS: 

MacBook Pro and Air 5-Point Pentalobe MacBook Pro 15" Retina I/O Board 

Screwdriver (1) Cable (1) 

• Spudger (1) 



SUMMARY 

Input, Output, Sideput. Whatever kind of puting you will be doing, a faulty I/O board cable is 
going to severely limit the functionality of your MacBook Pro with Retina display. This guide 
will show you how to replace it. 



©iFixit — CC BY-NC-SA www.iFixit.com Page 1 of 4 



Installing MacBook Pro 15" Retina Display Mid 2012 I/O Board Cable 



Step 1 — Lower Case 




• Remove the following pentalobe 
screws securing the lower case to 
the MacBook Pro with Retina 
display. 

♦ Eight 3.0 mm 

• Two 2.3 mm 



Step 2 




• Lifting from the edge nearest the 
clutch cover, lift the lower case off 
the MacBook Pro. 

• Set the lower case aside. 



©iFixit — CCBY-NC-SA 



www.iFixit.com 



Page 2 of 4 



Installing MacBook Pro 15" Retina Display Mid 2012 I/O Board Cable 



Step 3 — Battery Connector 




• Peel back the warning label 
covering the battery connector. 



Step 4 




• Using the flat end of a spudger, gently pry the battery connector straight up out of its 
socket on the logic board. 

• Bend the battery cables back and out of the way, ensuring that the battery connector 
doesn't accidentally make contact with the logic board. 



©iFixit — CCBY-NC-SA 



www.iFixit.com 



Page 3 of 4 



Installing MacBook Pro 15" Retina Display Mid 2012 I/O Board Cable 



Step 5 — I/O Board Cable 




• Using the flat end of a spudger, pry the I/O board cable straight up out of its socket on the 
I/O board. 

• In a similar fashion, remove the I/O board cable from its socket on the I/O board. 



Step 6 




• Remove the I/O board cable from 
the MacBook Pro. 



To reassemble your device, follow these instructions in reverse order. 



This document was last generated on 2012-11-01 04:04:03 AM. 



©iFixit — CCBY-NC-SA 



www.iFixit.com 



Page 4 of 4